|Home||About us||Commercial Photography||Gallery||Articles/reviews/blog||What's new|
Canon iPF8300 review and notes
Using the imagePROGRAF iPF8300 44 inch large format printer
We've got a new iPF8300 printer at Northlight, and Keith Cooper will be maintaining this page with information based on our experiences of getting used to using it at Northlight Images.
Updated 13th Sept. 2012
Please feel free to contact us for more info.
This page starts out with our initial setup of the printer.
Thank you to everyone who has ever purchased something via these links. If you follow a link and then buy absolutely anything it helps me run this site (the articles are all written by myself in my spare time)
- Keith (Other ways to help the site)
Amazon UK link / Amazon France / Amazon Germany
Amazon USA link / Amazon Canada link
This page covers the iPF8300 44" width printer (with internal disk).
For a smaller 24" print width version you would have to look at the iPF6300.
We've a full review of the iPF6300
The iPF6350 is a 6300 printer with an 80 GB internal hard disk.
At Northlight, we're driving the printer from OSX Apple Macs.
However, the functionality and software is very similar if you happen to be using a Windows PC.
I was asked how big the printer is.
Here's me standing next to it, holding the 44" roll paper holder.
Note some of our assorted boxes of papers on the shelves above me (very firmly screwed into the wall!)
Only problem is that our print room isn't very big, so I've used a 15mm fisheye lens and then 'fixed' the image with the extremely useful Fisheye Hemi PS plugin.
The printer is quite large - it took three people to take it upstairs to our print room.
First, the stand was put in place and then the printer itself placed on the legs.
The printer comes with 12 ink tanks - 330ml per colour.
These are huge ink carts - the same amount of ink in each one as a can of Coke... There is some 3 litres of ink in the printer.
When I reviewed the iPF6300, it turned up already loaded with ink, so I didn't get to install print heads and ink.
The printer is shipped with a lot of things secured with orange tape.
At power-up, I resist the temptation to set the interface to a different language.
The printer takes a minute or two, to get itself ready.
First task is to install the two print heads.
The carriage move out ready to take the heads
The heads are wrapped in sealed bags, with protective covers
Lifting the second set of clamps allows the heads to be fitted. They fit very comfortably and easily in place.
The picture shows one head in place.
Once fitted, the printer takes a short while to ready itself for fitting the ink tanks.
There are places for six tanks at either side of the printer.
Each tank is placed in the holder and lowered into place.
You need to push the blue handles down quite firmly to engage the ink feed.
A red LED lights to show that a cartridge is correctly placed.
The ink now needs to be pumped through the various lines and into the heads.
This takes some time (20mins?) - I went away and made some coffee and had my lunch...
Once loaded with ink, the printer needs to work out the alignment of the print heads I fitted.
This needs doing to much better accuracy than the mechanical tolerances of the head mounting fittings.
To achieve this, the printer prints various alignment patterns and measures them. The process is fully automatic, but needs some paper loading.
The iPF8300 is front loading - it does not have a direct through print path. This isn't a problem for myself, since I don't print on rigid substrates.
You can see the roll holder beneath the printing area.
A roll of 'HW Coated' paper is supplied with the printer.
The printer needs to be told what paper you are loading.
The supplied paper is on a 2" core.
The combination of short length roll and 2" core means that the paper has a very pronounced curl.
This curl makes it quite trick to feed the paper through initially - now I know this, I'd bend the leading edge upwards to make it easier to feed.
I've also made a mental note to avoid roll media on 2" cores where possible.
When finished (another 10-15 mins), don't unload the paper.
Keep it in place to calibrate the print heads - this is a very important step that will improve the accuracy and repeatability of your printing.
The process is fully automatic.
Afterwards, remove the paper, put it back in the box and keep it until you next need to calibrate (probably at first ink change)
Ready for printing
That's it - the printer is ready. I've found it on the network, checked I have appropriate software and profiles installed and am ready to print.
After setting up, the printer shows all carts at 100%
Now if only I didn't know about the issue with the display resolution...
I discovered with the 6300, that for some weird reason the display only changes in 20% increments. Thus I could do a print and everything would drop to 80%. Potentially more annoying would be starting a big print job with everything at 20% and then it dropping to 0% after the first print (this only happens if you try printing late on a Friday afternoon BTW ;-)
Ink charging always eats up maintenance cartridges, but the one on the printer is hefty enough for me not to worry for some time.
The printer works just like a bigger version of the iPF6300, so I went back over my review to remind myself what needed sorting out with network settings, drivers and paper profiles.
I still had some 24" Canon HW Satin paper left over from the 6300 tests, so I loaded it up (much easier with a 3" core tube and paper that had 'relaxed' a bit on the roll)
Below is my first quick test print (20"x12") - it's a view of Mt. Rainier poking through the clouds, taken from a plane shortly before landing at Seattle, early one evening.
A very nice printer indeed.
I'll be writing further notes, on this page or linked from the table of contents at the top, as we find out just what the printer is like to use.
I need to produce some B/W prints for a client in a few weeks, and wanted to see how the Canon B/W print mode would look with the particular paper required.
Now I'm pretty confident that it'll be OK, or else I wouldn't have got the 8300. However, I do want to see what the image will look like with Innova IFA11 Smooth natural white paper.
Just because I've got a new printer does not mean I'm ditching all my old papers - in fact I've two unused rolls of 44" paper, that I acquired over time, and never used in my Epson 9600 (Epson PGPP, and Ilford Gold fibre Silk)
First, sheet feeding.
This is front feed only with the 8300.
You need to set the paper type, raise the platten (big lever at the RH side) and position the paper, aligning it with the orange marks.
Upon putting the cover down, the paper is ingested and measured.
After loading, the paper is positioned like so, ready for printing
You can see the marks at the RH side, and also, under the platten mechanism, in the bottom LH corner of the picture.
As you'd suspect, this is not a printer I'd want to be feeding sheets into all day long, one at a time...
I've loaded a sheet of innova IFA-11 and, after looking at the suggestions on the Innova site, have selected a media setting of fine art textured.
The printer has some very useful tools for setting media types (see pt2 of the 6300 review) but I'm going to pick the Innova suggested setting for this quick test.
I'm printing the Northlight B/W test image, from Photoshop, with the plugin (highest quality, 16 bit source image)
One thing I noticed was the slight indecision in the print time estimate.
First around 8 minutes, and then only seconds later, 3 minutes.
I'm assuming that the first estimate was for an A3 page, whilst the second was when the printer realised that I was only printing on part of the paper.
Here's the print after printing - I've lifted the cover to see how near the lower edge it's being held (within a few mm)
It's good, but I notice slight non-linearity in the bulls-eye pattern, and the print is slightly too dark in many areas.
After printing a test pattern, I made a linearising B/W profile (using QTR), applied it to the test image (GG2.2) in Photoshop (convert to new profile, then assign GG2.2)
The results are much better, and based on my knowledge of the test print and use of this paper in the past, perfectly adequate for my upcoming print job. Of course, I may refine this in future and will be looking at the True B&W software over time.
Do remember that your seeing a reduced web version of the file, so don't read too much into detailed differences. It's the overall feel you're after (note that the corrected version is lighter, so as to correct for the original being a bit too dark)
I also used the making of this correction profile to test how long you need to wait before measuring a print. On this paper D-max went from 1.59 15mins after printing to 1.61 after 4hrs and 1.62 by 8 hrs. My preference is to leave things overnight, although Canon tell me that with glossy papers there is not much change after half an hour.
For the measurement anoraks out there, here's the plot after 5 hrs :-)
Next up, I'll be profiling some of my general purpose colour papers (lustre finish types), and seeing how well larger sheets do (I've no reason to assume any problems so far)
There are paper manuals - this is useful, I can keep them with the printer. However, not so good is the over 1.5kg of foreign language versions that I've just dumped into the recycling bin...
Get some cotton gloves - due to the way the paper loads from rolls and sheets, you are much more likely to touch the printed surface.
The printer spends a minute or so shaking the ink tanks after it is powered up - however, it stops if you lift the covers to peek...
Canon, please get the accounting software option fixed for Mac users. I just installed an old WinXP copy of Virtual PC on one of our old PPC 10.4 Mac servers - I can now use a remote desktop connection to open a copy of the WinXP software running on an emulator, on a server in another room. Clunky, but I can at least now use the accounting s/w to work out costs if I'm doing a load of print work for someone.
Several times now I've had an obscure 'blue platten switch is dirty' message appear on the display - lifting the front cover seems to fix it - I'll look at the manual!
It seems that there are loads of blue platten switches - this reminded me to read more of the manual, and also that the platten below the area the print head moves is freely accessible, so will collect overspray and some ink during automatic maintenance activity. This area is easily cleaned with the little cleaning brush, or a paper towel.
I happen to like Innova Ultra Smooth Gloss paper (IFA-49), which means I have several boxes and a 24" roll of the stuff in the print room.
As I know from testing the 6300, it's quite easy to add custom paper types to the paper menu.
Looking at the Innova suggested paper settings, I see that it's marked as HW Glossy photo 2 for the x100 printer range.
This paper setting isn't there on my 8300, so I loaded an A3 sheet to run the paper adjustment test, after specifying a paper type from the weight and finish, created a custom paper setting.
The media configuration tool allows you to load this into the printer.
Afterwards I printed a profiling target.
Note the media type - the PGP on the end of the name is to remind me what settings I based it on (Premium Glossy Paper 280)
So now I can load IFA-49 paper and know that I've optimised print quality to a large degree.
Looking at various online resources I can see that Premium Glossy Paper 2 280 and Premium Semi-Glossy Paper 2 280 are suggested for several papers as media settings.
One paper that I'm curious to test is the Epson Traditional Photo Paper (Exhibition Fibre in the US) - this has a suggested setting of 'Heavyweight Semi-Gloss Photo Paper 2'
When I looked at this paper some time ago I found it a bit too delicate for my taste - taking several sheets to get a good print from the Epson4880 I was testing.
Time to see what it does in the iPF8300 - I'll try premium semi-gloss 280 for my custom media type
I'll also remember to cut the A3+ sheets I have in half...
After setting up the media type, I load an A3+ sheet and print a profiling target
The print looks fine until I get the light to reflect off the surface.
There is a fine mark on the paper surface - it starts about 2.5" from the leading edge and runs the length of the paper. This suggests that something in the feed path is rubbing against the paper.
A more detailed view
Note that this is a slight dent in the paper surface - what you can see is -not- a scratch in the ink.
Of course, I've been back to other prints I've made and there is no sign whatsoever of any mark.
So, Epson TPP/ExF has a really fragile surface - no news there after my original tests. I'll see what Canon UK have to say, since this is an issue reported in the past (discussion thread at LL)
Given that Innova ultra smooth Gloss (IFA 49) is similar (very similar ;-) in finish to the Epson TPP and shows no marks, I don't see the surface marking as an issue (YMMV).
I've tested some of the many other assorted papers that I've got samples of, loading them and unloading to see if there is any sign of marking - I can detect no other marks. Given the discussions in the LL thread mentioned above, and my original experience when reviewing the 4880, I'm quite satisfied that this problem is one found with the Epson ExF paper alone.
Just appeared on the Canon US site is new driver software adding 64 bit support - so I can at last run all my plugins in CS5 and 64 bit mode.
With all the new features, I'll be checking just what the software does over the next few days... Time to check that b/w curve shown above
iPF8300 imagePROGRAF Print Plug-In for Photoshop CS4/CS5 Ver.5.00 for Mac OS X v10.4-v10.6
Modifications from Ver.4.10
iPF8300-PinCS5-Win-500.exe and iPF8300-PinCS4-Win-500.exe
Modifications from Ver.4.10
This from the (Mac) install notes
Note the following limitations when using this software.
64 bit - almost
On first use of the new plugin, there is this warning about any custom sizes you've set (using a Mac BTW)
Eager to see what things are like in the 64 bit world, I'm going to test with a quick print that I've been using for some aspects of profile testing.
I remembered installing the CMM when testing the 6300 earlier this year, but just to be sure I pulled a copy from Adobe.
After an installation, I look at the ICC colour conversion options in the plugin, and try to switch to the Adobe CMM (it allows for BPC and makes printing with the plugin more consistent with printing directly from Photoshop's print dialog.
No joy there though.
Then I re-read the CMM info page that's in the help.
Doh! .. read -all- the notes Keith...
So, printing now works in CS5 64 bit on the Mac, but you can't use the Adobe CMM - it does work fine in 32 bit though.
So, when to get a 64bit CMM from Adobe? I'll ask...
I printed the same test target on IFA-11 paper, as earlier, and the shape of the curve is noticeably different.
Note that these test prints were produced several days apart, so I'd expect some slight drift in measurements - don't try and read too much into the precise numbers ;-)
For the new V5 print plugin, the main change seems to be an opening up of the shadows except for the 95-100 range where they've been compressed.
The main aim of the graphs above was to see if there was a noticeable change and yes, there does seem to be one.
Certainly enough to mean that I'd use a new linearising profile for this paper and settings.
However, I note that only the plugin has been updated (for the Mac) - presumably this now means that the plugin prints differently to using the normal print driver through Photoshop?
I've hardly been hammering the printer, but that warning keeps coming back.
I'm waiting to hear what it might be from Canon UK - it's not a problem for printing, I just feel I shouldn't be getting the error.
As I mentioned, I've boxes of sample papers sitting around, many of them quite nice, even if I've previously not used them much.
I thought I'd experiment with some Epson Velvet Fine Art paper. It's a thick rag paper with a 'velvety' finish.
In the past I've found that I liked the look of some images on this, in particular, this shot of a wheat field in central Oregon.
I chopped up an A2 sheet, into an A3 and two A4.
The two A4 would do for media settings adjustments and the A3 for a colour ICC profile.
After some research, I decided to have a go with the 'Special 10' media setting.
Once again I went for 'Canon Standard' ink limits, since trying a couple of variations produced no obvious differences (see the iPF6300 review for more on this)
No problem creating my custom media type until I came to see how well it worked in the B/W print mode
The Monochrome option is not available for 'Special' media types.
This did mildly annoy me, since I was sure I'd heard that the new media types in the x300 range did allow the use of B/W mode, with 'Special' settings.
Now I know that this 'feature' is the same as it was when I looked at the iPF6100 a while back.
So, I've created a second media setting, based on the 'Premium Matte Paper' settings.
Some suggestions for media types to try for 3rd party papers can be found at the Canonipf wiki.
As you can see, this particular version of my VFA media profile does- allow me to use the B/W print mode.
So I've now got two settings - one to use with my ICC colour profile and one to use if I wanted to print in the Mono Photo mode.
For the trainspotters out there, here's the measurement of a 21 step grey ramp, as I've shown earlier ;-)
This is with the new driver, and shows that sharp kink in the deepest shadows that seems to be a feature of the new print plug in.
I've got several large prints to do before long for a client - well, once a particular 44" roll of paper turns up, that is.
Having pretty much got the hang of the Canon driver, I'm going to be looking at other software, in particular True Black and White, which I briefly reviewed at the time I was looking at the iPF6300.
Some time ago I wrote about some of the work involved in printing a new version of a rarely seen photo of Jane Fonda as 'Barbarella'.
It so happens that Paul Joyce, the photographer, needed some additional 42"x28" copies of this print.
After some of my previous testing, I decided that printing using the Monochrome mode of the Canon driver onto Innova IFA 11 Smooth Fine Art paper would produce results every bit as good as I was getting from the monochrome print setup I had with my Epson 9600/ImagePrint.
Information from Canon also leads me to believe that the archival properties of the prints should be relatively similar (i.e. way beyond my lifetime)
I've linearised the output before printing, with a correction profile, based on results from the new version of the Canon Print Plug-in.
I'm still refining some aspects of my B/W print workflow, but I'm pleased with the quality of the prints I've produced.
The photo shows several prints not long after coming out of the printer. With a stiff paper like the IFA 11, they stand very easily for drying.
Note that these pictures are going to be sent in 8 inch diameter shipping tubes, so I make no attempt at forcing them to lie flat. The natural curl will be just fine for interleaving with tissue paper and shipping.
I needed six prints, so after making the first one, I just went into the web interface for the printer and called up 5 more copies from the printer's hard disk.
Note the long file name - this tells me that it's a 42"x28" print sharpened file, which has had a specific correction profile applied. By all means come up with a version of this that makes more sense to you, but do try and take a consistent approach to naming files - it helps when it comes to re-prints in a year's time...
I've just been sent a couple of Innova papers to try with this printer.
I'll be writing up some of my thoughts in forthcoming short reviews, but a few issues with one paper warrant some attention here.
I've a 36" roll of Cold Press Rough Textured – 315g/m2 - IFA 13. Now this is like a thick textured version of the paper I used for the Jane Fonda prints.
The key difference is the thickness - at 520 microns, this paper feels like a stiff card, so I wondered how it would feed through the iPF8300.
No problem in loading it through the print path and pulling it through to line up against the paper alignment marks.
It did turn out too thick to run through our iSis scanning spectrophotometer, and finding the best media settings is proving more complex than I'd hoped, but after running the automatic print feed adjustment (during the custom media settings setup) it prints and feeds well, with no marks whatsoever.
BTW, if anyone has used this paper in an 8300, I'd love to hear what settings you used...
One of the irksome features of the supplied Apple Mac software is the fact that the accounting functions won't work - you need a PC.
It so happens that we're a Mac based company, and I'm disinclined to pay for a copy of Windows just to show job costs.
Fortunately, I've a copy of Virtual PC, from several years ago, that runs Win XP, but only on an older PPC Mac. No problem, Karen has my dual G5 PowerMac, and it has a copy of XP running. Since it's an emulator, you can start/stop it really quickly.
I can also use the Mac's screen sharing to control Karen's Mac, without even going upstairs to her office.
All is going well - I can fire up the accounting software and look at the detailed job costing info...
Just when I'm patting myself on the back for this nifty solution, a few slight problems arise.
All my custom media types appear as 'unknown' on the PC. 'Unknown' has no cost, and can't even be assigned a dummy value.
OK, I'll synchronise the media settings from the printer to the PC...
Nope, you can't do that (not that I could see? any suggestions appreciated! ;-) )
OK then, I'll export the custom settings from my Mac, using the Media Config tool, and then load them on the PC
Another smart idea?
Apart from the fact that you can only export one setting per file...
No - foiled again
At this point I've had enough of this for a while and click on the job I was interested in, via the accounting software.
It tells me the info I was after - the cost of the ink.
This job happened to be using a sample roll of glossy paper, to reproduce some prints for a friend - the paper didn't cost me anything and I wouldn't normally use it for our print work. They insisted on paying me something for the prints, so at least I know what it cost me in consumables.
So, what have I learnt?
Setting up custom media types across a number of printers would seem to be a right pain.
Is there no way to go to a particular computer and tell it to synchronise it's media options to the settings on a printer? (Is this really so?)
Canon - please get the Mac software to include the accounting software ASAP
I can at least find out how much ink a job used, and the cost...
The 13" roll of Olmec glossy 260gsm produces some excellent small glossy prints (using a custom profile)
A 13" width roll of paper looks rather small on an iPF8300 :-)
After a suggestion on the LL forum, I tried copying all files and folders in the Mac 8300 Media config tool folder to the equivalent folder on the PC - all files that is except the application itself.
I then opened up the MCT on the PC and selected 'add genuine paper', then selected 'update'.
The tool then notices that the media settings are the same and -only- updates the driver.
After things update, I check the custom media - they are there!
I can now use the accounting option via the other computer running VirtualPC - I just have to wait until Karen is not using it ;-)
Over the years I've collected quite a few boxes of paper, as samples from paper suppliers (see the picture of me at the top of the page)
Whilst I'll often give away smaller boxes, 20 A3 sheets of photo paper can be of use for quick print jobs.
Just such an occasion comes up at Christmas. Having got married this year, Christmas cards have turned from something I mostly remembered to send to a few close friends, to a much more organised operation. As such, there was a requirement for some small wedding prints to include with specific cards...
Anyway, I needed half a dozen small prints of one of the pictures of Karen and myself.
I use Innova IFA49 (Ultrasmooth gloss) for some of our large prints and remembered I'd still got a box of it from when it first came out. What I'd forgotten was that in common with many other papers of this type (from different suppliers) the sheets were prone to developing a pronounced curl.
Although I thought I'd flattened the paper quite well (edge of a desk), a few minutes sitting in the 8300 were enough for the edges to lift.
I resized and printed 8 copies of the image using ImageNest - remembering to use it in 64bit mode and to get ImageNest to handle colour management.
A few moments after printing started I heard a noise of paper being scraped and aborted the print job.
The detail shows where the paper has started to shred.
I loaded a sheet of the current version of IFA49 and it's perfectly flat.
8 small prints of Karen and myself have now been sent to the house Christmas logistics department... :-)
Afterwards, I looked through the rest of our paper stocks.
As a reult, I now have several boxes of different slightly warped papers to give away next time I give one of my talks to a local camera club :-)
It's worth noting that problems with curled/bent paper affect most printers I've looked at, such as this example (right) from our Epson 3880 review.
Earlier on I mentioned how useful it was to be able to create media settings for a particular paper.
For some papers, such as the thick Innova one I mentioned earlier, I've found that the normal setting applies a bit too much ink. Indeed, for this paper I ended up selecting one of the lower ink limits to use when making my profiles.
The problem came when I tried to use my new custom media setting for B/W - the B/W print option is greyed out, that is you can't use it with a media setting that has anything other than Canon Standard for the ink
Of course I can make a new custom setting with 'standard' ink amounts, so I can use the Monochrome Photo print setting. Whilst you can edit custom settings, there does not seem to be a simple way to duplicate, edit and rename a custom setting.
It would have been nice if selecting a non standard ink limit warned you about losing the ability to use the B/W print mode.
Now it happens that I have a good icc profile for the IFA13, which gives a good neutral greyscale.
One other issue I'm looking at, is the -slight- magenta tint in 'Monochrome Photo' images when viewed in dimmer tungsten lighting. There is also a slight greenish tint when viewed under high colour temperatures (~7500K north facing window).
Obviously 7500K lighting is not that common, but some of my commercial prints do end up in quite dim lighting. There is an adjustment for Green/Magenta tint in the B/W print settings and I'll be looking into this (see article link)
Canon have announced in the US a 'higher speed' version of the 8300 (the iPF8300S) and the 6300 (iPF6300S)
Uses just 8 colours - link to US press info for 8300S and 6300S
Wondering why the updates on this page have slowed? Actually for the very good reason that the printer is performing excelently.
I've recent had quite an upsurge in large print sales and the 8300 is doing a splendid job.
We've still no solution or cause for the occasional 'blue switch error', but at least Canon UK have seen it in another printer so no longer put it entirely down to something I do ;-)
The other day I was starting a test of some new paper. It's a pearl finish paper at 290gsm, which is supposed to both very tough, and through its surface finish, somewhat resistant to scanning and copying (we'll see... ;-)
Before profiling I created a custom media setting. However, during the final updating of the printer (it's in another room) it seems that I'd left the paper lever in the up position, so the process stalled. The software (Mac) then got stuck in a loop, telling me the printer was not available. The problem came after I'd let the printer restart (when I put the lever down) and had to force quit the Media config tool.
Looking in the media types you can see a media setting named '*'
It's called PJ Ultra Pearl in the driver, but '*' in the printer's media list, both here and via the front panel.
The PJ Ultra-Pearl setting is where I had another go later and successfully created a media setting for testing.
You can't delete a custom setting here (or edit its name), so it's on to the custom settings...
Whoops - the '*' paper type isn't there.
So, I have a paper type called '*' on the printer that I can't see any way to delete.
Fortunately, someone from Canon UK is visiting next week, so I'll ask...
...they didn't know either
A reader asked me if I knew wht the print plugin had problems printing images in the ProPhoto colour space when in 64 bit mode (CS5)
We don't use PCs at all so I couldn't help, but they've kindly sent me info on what they found.
Just as with the Mac, there is no 64 bit version of the CMM, so you end up printing via the system CMM. It's this that has a problem -if- you have an alpha channel in a ProPhoto image. This appears with some stitching progams in the output image (I found it in Stitcher a while ago). Seems the problem goes if you remove the alpha channel.
The printer 'just works' - I've had no paper feed issues or print quality issues whatsoever. The latest i1Profiler software makes just great profiles with 2900+ patches on an A3+ sheet.
I still get the request to 'clean the blue switch' every so often, but it doesn't seem to cause any problems.
Ink use is pretty frugal - I leave the machine switched on all the time, so it uses a little bit every so often. I'm not keeping detailed records of ink use, but I feel it uses less than my old Epson 7880 did (of course those big cartridges and poor ink level display resolution can skew this)
The phantom media type I created a while ago is still there.
With unbrightened papers I'm using the Canon B&W print mode set at neutral, whilst with brighter (with OBA) papers I'm adding a slight correction of -8 to give a better overall look in mixed lighting.
This is covered in much more detail in my recent 'Colour tints in B&W' article.
The printer is giving sterling service, and I'll be testing two new paper types shortly.
I've also heard of an issue concerning borderless printing on wide paper. It seems that borderless only works up to 42" width. That's fine if you use 42" width paper?
Only problem is that sometimes papers are not quite cut correctly, and a roll turned out to be 42.125 inches wide.
That extra 1/8th inch was picked up on loading, so the printer would refuse to print borderless. By turning off the paper size detect it's possible to print to almost one edge - not perfect, but closer
I've started putting larger carts into inks that I use more of.
Here's what at 700ml (grey) cart looks like (UK 568ml/20 floz pint of milk for comparison)
Making of the large 14m Leicester print Keith's May 2012 exhibition in Leicester features a single iPF 8300 print just over 14 metres long. This article covers all aspects of creating this image, from Keith's initial experiments with panoramic photography, through to the problems of printing and mounting such a photograph.
It includes discussion of some of the limitations of the Canon Photoshop plugin and in handling large images (in terms of numbers of pixels wide) [May 2012]
In the US, there are assorted discount/trade-in deals from Atlex that will get you an iPF8300 for $2000.
Although a new iPF8400 is on the way, there don't appear to be many changes that as a fine-art printer I'd be concerned about
An interesting forum thread at LL about a failure of the cable connecting the print heads to the rest of the machine.
What seemed like a print head failure (cyan cast to prints) turned out to be a cable fault.
Questions? - feel free to ask!
The views in this article represent those of Keith Cooper.
Keith is always happy to discuss matters raised in his articles. You can Email Us
Northlight Images prides itself on its independence when giving advice. We do not sell hardware or software and have no direct commercial links with any of the software or hardware vendors that may be mentioned here. See our Review Policy for more information.
You can search all the hundreds of articles on the site for more information
Have you found an article on the site useful or helpful? If so, please consider sharing a link to the article or mentioning it on a forum - Thanks to everyone who's helped the site become better known. Explore our site... Digital Black and White photography and printing - some of Keiths thoughts, techniques and tips for those interested in a digital approach to black and white. New site content appears on the News, articles and reviews page. We've lots of original Photography Articles and Photography Reviews on the site to help anyone interested in photography.Thanks to the visitors who've made Amazon purchases (any kinds of items whatosever)
via: Amazon UK/Amazon France/Amazon Germany/Amazon USA/Amazon Canada
It won't save extra money we're afraid, but it does help in the running of the site, and we really appreciate it...
Commercial Photography - Architectural Photography - Industrial - Print Gallery - Corporate Events